BKWKT - 32-50 DUCT SEALANT
- MSDS: BKWKT
- Manufacturer: H B FULLER COMPANY
- Product Name: 32-50 DUCT SEALANT
- National Stock Number: 8030-00F017769
Product Identification
Product ID:32-50 DUCT SEALANT
MSDS Date:12/18/1985
FSC:8030
NIIN:00F017769
MSDS Number: BKWKT
Responsible Party
VADNAIS HEIGHTS, MN 55110
Emergency Phone: (612) 481-3300
Info Phone: (612) 481-3300
Cage: ODH19
Contractor
Telephone: 847-358-9500/612-236-5842
Cage: 5P957
Ingredients
PARAFFIN WAXES & HYDROCARBON WAXES, CHLORINATED PARAFFIN
CAS: 63449-39-8
RTECS: RV0450000
Fraction By Weight: 1-10%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MIN. SKIN: WASH W/SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
Fire Fighting
Flash Point:NONE
Extinguishing Media:LIQUID MATERIAL IS NON-FLAMMABLE. WATER SPRAY,
FOAM, DRY CHEMICAL OR CARBON OXIDE ON DRIED PRODUCT.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:WATER SPRAY MAY BE USED TO COOL FIRE
EXPOSED CLOSED CONTAINERS TO PREVENT POSSIBLE PRESSURE BUILD-UP.
Accidental Release
Spill Release Procedures:CONTAIN & REMOVE W/INERT ABSORBENT. KEEP SPILL
OUT OF SEWERS.
Handling
Handling and Storage Precautions:AVOID PROLONGED/REPEATED CONTACT
W/SKIN.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:PROVIDE STANDARD INDUSTRIAL VENTILATION
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>200F
Percent Volatiles by Volume:25%
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:HYDROCARBONS, HYDROGEN CHLORIDE,
PHOSGENE & CO
Disposal
Waste Disposal Methods:SOLIDIFY & DISPOSE OF IN AN APPROVED INDUSTRIAL
LANDFILL ACCORDING TO FEDERAL, STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.